Ammonia Refrigeration Vancouver Island: What Plants, Cold Storage and Ice Rinks Should Know

Ammonia refrigeration Vancouver Island plants, cold storage warehouses and ice rinks run on is a different trade from the walk-in cooler at a restaurant. The systems are bigger, the refrigerant is ammonia (R-717), and the rules come from Technical Safety BC and WorkSafeBC rather than a health inspector. Here's what owners and plant operators from Victoria to Port Hardy should know about how these systems work, what maintenance they need, and who's allowed to touch them.

Where ammonia systems show up on the Island
Ammonia has been the standard for heavy-duty cooling for a long time because it moves a lot of heat for the power it uses. On Vancouver Island we see it in four places:
Seafood and fish processing plants in Campbell River, Port Hardy and the mid-Island, where blast freezers and cold storage have to keep up with a landing.
Agricultural cold storage and packing facilities that need steady temperatures for fruit and vegetables.
Ice arenas and recreation centres, where a chiller carries a large load to keep the ice surface consistent through the season.
Larger manufacturing, for process cooling and secondary heat-exchange loops.
Our ammonia refrigeration page lists the equipment our Island crew services: screw and reciprocating compressors, evaporative condensers and cooling towers, surge drums, oil separators, high-pressure receivers, and pumped-liquid, gravity-feed and direct-expansion feed systems.
What makes ammonia different
Ammonia is efficient and it's not a greenhouse gas, but it's toxic and it has a sharp smell you notice at very low concentrations. That's why these plants have gas detection, emergency ventilation and a machine room nobody wanders into. A release can be dangerous to people in the building and nearby, so the rules around design, operation and maintenance are strict for good reason.
What this means for an owner is simple. Nobody on your staff should ever open an ammonia system, bleed a valve, reset a compressor lockout or bypass a safety. Ammonia work needs a qualified, licensed contractor working under Technical Safety BC rules. Your operators' job is to watch the system, log readings and call when something changes.
Maintenance that keeps a plant running
The preventive work on an ammonia plant looks different from a supermarket rack. Our team's maintenance programs cover the items an annual safety audit asks about:
Critical valve inspections, including relief valves and king valves.
Gas-detection calibration, so the sensors in the machine room actually trip at the right level.
Emergency ventilation checks, confirming fans and dampers run when the detector calls for them.
Lockout and tagout execution on every job, so nobody works on a live system.
Compressor checks: oil, vibration, amperage, suction and discharge pressures.
Condenser and cooling tower condition, which matters more in our wet, mild coastal winters than most people expect.
What our Island crew checks first on a service call is the log. A plant whose operators record pressures and temperatures every shift gives us a trend to read, and a problem usually shows in the numbers days before it trips an alarm.
Fall and winter on the coast
Fall is ice rink start-up season, and that's when a chiller that sat idle all summer shows its weak points: a seal that dried out, a sensor that drifted, a pump that won't prime. Book the start-up inspection early, before the first ice is scheduled.
Winter on Vancouver Island means storms and power outages rather than hard freezes. For a processing plant or cold storage, the risk is a system that trips on an outage and won't restart cleanly. As a general rule, have your operators know the restart sequence your contractor has written for your plant, and know who's on call. We provide 24/7/365 emergency response for ammonia leaks, compressor failures and system lockouts across the Island, and a lockout left overnight can mean a lot of product at risk.
When to call a technician
Call immediately if gas detection alarms, even briefly; if anyone smells ammonia outside the machine room; if a compressor trips and won't reset from the control panel; if head pressure climbs or suction pressure drops out of its normal range; or if oil levels change without explanation. Those are not wait-until-Monday problems. Our Red Seal Journeyman technicians have training in WorkSafeBC chemical handling, lockout procedures and Technical Safety BC compliance, and they cover the whole Island from Victoria to Port Hardy. If your plant also runs refrigerated seawater or blast freezers on the boats, our post on marine refrigeration on Vancouver Island covers that side of the work.
Ammonia refrigeration Vancouver Island FAQ
Who can work on ammonia refrigeration Vancouver Island plants rely on?
Only a qualified, licensed refrigeration contractor working under Technical Safety BC rules. Ammonia is toxic, so plant staff should never open the system, bleed valves or bypass safeties. Our Island technicians are Red Seal Journeymen with WorkSafeBC chemical handling and lockout training, and we serve plants from Victoria to Port Hardy.
How often does an ammonia plant need maintenance?
Most plants run on a preventive schedule set with their contractor, with a thorough inspection at least once a year before the safety audit, plus regular compressor and gas-detection checks through the season. Processing plants and rinks with heavy seasonal loads often add a pre-season start-up visit.
Our Campbell River processing plant smells faintly of ammonia. Is that normal?
No. Ammonia has a strong smell at very low concentrations, so any odour outside the machine room means something is leaking and the system needs attention now. Keep people clear of the area, follow your plant's emergency plan, and call for emergency service rather than waiting to see if it clears.
What does Technical Safety BC have to do with my ice rink in Nanaimo or Duncan?
Technical Safety BC regulates refrigeration plants in British Columbia, including the ammonia chillers in ice arenas. Owners are responsible for operating and maintaining the plant to those rules, and an annual safety audit checks the records. A maintenance program with valve inspections, detector calibration and ventilation tests helps you get ready for it.
Can you handle an ammonia emergency at night or on a weekend?
Yes. We answer 24/7/365 across Vancouver Island for ammonia leaks, compressor failures and system lockouts. Our local technicians secure the leak, troubleshoot the failure and get the plant back online safely. Call 250 713-7355 and tell us what the gas detection or control panel is showing.
Is ammonia a good choice for a new cold storage building on the Island?
For large loads, often yes, because of its efficiency and because it isn't a greenhouse gas. For smaller buildings, a conventional or glycol system may fit better. The right answer depends on your load, your site and your staff, so talk it through with an engineer and a licensed contractor before you commit.
Need help on the Island? Call 250 713-7355 or see our Vancouver Island services.
The Custom Climates Mechanical team, Vancouver Island






Comments