Commercial Refrigeration Nanaimo: Repair and Maintenance Tips for Mid-Island Businesses

If you run a kitchen, a brewery, a grocery store or a processing plant in Nanaimo, your coolers and freezers are working in salt air, damp winters and a busy summer season. Commercial refrigeration Nanaimo businesses depend on takes a little more care here than it does inland, and the repairs we see most often on the mid-Island follow a pattern. This post covers what our Island crew checks first, why coastal conditions matter, and when a problem is worth a call.

What commercial refrigeration Nanaimo businesses rely on
Our Island crew is based in Nanaimo and works the Highway 19 corridor, from the processing and cold storage operations around Duke Point Industrial Park to the docks at Departure Bay, the restaurants and pubs downtown and the retail stores near Woodgrove. We also look after agricultural cold storage for farms across the Regional District of Nanaimo. The equipment is varied, but it comes down to a few groups:
Walk-in coolers and freezers in restaurants, grocers and processors.
Glycol chillers and draught cooling in craft breweries and hospitality venues.
Supermarket display cases and the commercial HVAC that keeps a store comfortable.
Cold storage and freezers for seafood and marine processing at harbour operations and plants.
Custom Climates Mechanical is the Vancouver Island division of Custom Climates, and we cover the Island from Victoria to Port Hardy with Red Seal technicians and 24/7/365 emergency repair.
Why salt air changes the maintenance picture
Nanaimo's coastal air carries humidity and salt, and both are hard on outdoor equipment. Rooftop HVAC units and outdoor condensing units sit in that air all year. Over time, salt eats at fins and tubing, and a corroded coil loses capacity long before it fails outright. That shows up as longer run times, higher power bills and a system that can't keep up on a warm July weekend.
Two things help. The first is corrosion-resistant coil coatings on new or replacement condensers, which slow the damage down. The second is a preventative maintenance schedule where someone actually rinses and inspects the outdoor coils, checks fan motors and looks at the refrigerant charge. Many owners on the Island don't see the outdoor unit for months at a time, so a scheduled visit is often the only time anyone looks at it.
The calls we get most on the mid-Island
A walk-in that won't hold temperature. Usually a frosted evaporator, a worn door gasket, a defrost that isn't running or a condenser that can't breathe. In a damp Nanaimo winter, humid air sneaking in through a bad gasket builds frost fast.
A brewery chiller running warm. Glycol systems have their own set of issues: low glycol level, a weak pump, a fouled heat exchanger or a condenser loaded with debris. When the glycol runs warm, fermentation temperatures drift and draught beer pours foamy.
Display cases sweating or icing. In grocery stores, cases that sweat on the outside or ice up inside usually point to an airflow, defrost or door problem. Catching it early keeps product safe and avoids a shutdown in the middle of a busy day.
Processing freezers after a long run. Seafood and food processors push their freezers hard in season. A unit that struggles after a heavy run often has a dirty coil or a fan motor on its way out.
What staff can check before calling
You don't need tools for this list, and none of it involves opening a panel.
Make sure doors are fully closed and gaskets are sealing. Look for frost on the gasket or ice around the frame.
Check the thermostat or controller setting in case someone changed it during a cleanup.
Listen for the fans inside the box and the unit outside. Note whether the compressor runs constantly or not at all.
Clear boxes, leaves or debris away from a ground-level condenser if it's safe to reach. Don't spray water on it or use anything sharp or hot on the coils.
Keep a thermometer log and move product if the temperature keeps climbing. Cold food is held at 4 C (40 F) or colder, and perishable food shouldn't spend more than about two hours in the 4 to 60 C range.
Refrigerant, electrical and defrost repairs need a certified technician. Please leave those to us.
When to call a technician
Call if the temperature keeps rising after you've checked the door and the settings, if you see heavy frost on the coil or ice on the floor, if a compressor runs non-stop or won't start, if a fan grinds or hums loudly, or if a breaker trips more than once. Our Island crew runs 24/7/365 emergency service across Nanaimo and the mid-Island. You can see what we do locally on our Nanaimo refrigeration page, and if you run a boat or a processing plant, our post on marine refrigeration on Vancouver Island covers RSW systems and blast freezers.
As a general rule, a system that gets a spring and fall check lasts longer in salt air than one that only sees a technician when it quits.
Commercial refrigeration Nanaimo FAQ
Do you offer 24/7 refrigeration repair in Nanaimo?
Yes. Our Island crew provides 24/7/365 emergency repair in Nanaimo and along the mid-Island, with Red Seal technicians on call. When you phone, tell us what you're seeing and hearing so the technician can bring the right parts. A walk-in or display case that's losing temperature is worth a call at any hour.
Why do outdoor condensers wear out faster near the Nanaimo waterfront?
Salt and humidity in the coastal air corrode coil fins and tubing, so the condenser slowly loses its ability to shed heat. That means longer run times and a system that can't keep up in warm weather. Corrosion-resistant coil coatings and regular coil cleaning both slow that process down.
Can you service glycol chillers for a craft brewery?
Yes. Glycol chillers and draught cooling are a regular part of our work for breweries and hospitality venues in Nanaimo and across Vancouver Island. We check glycol level and condition, pumps, heat exchangers and the condenser, and we can set up remote monitoring so a warm tank gets noticed before the beer does.
What areas around Nanaimo do you cover?
We work the Highway 19 corridor, from Duke Point and Departure Bay to downtown and the Woodgrove area, plus farms across the Regional District of Nanaimo. Our Island division covers Vancouver Island from Victoria to Port Hardy, including Duncan, Courtenay, Comox and Campbell River, so a site outside Nanaimo is not a problem.
Do you install cold storage for seafood processors on the Island?
Yes. We install and repair walk-in freezers and cold storage for seafood and marine processing at harbour operations and plants, and our Island team handles ammonia refrigeration and marine refrigeration as well. Those systems need a licensed contractor, so please don't attempt repairs on them in-house.
Is Custom Climates Mechanical the same company as Custom Climates?
Yes. Custom Climates Mechanical is the Vancouver Island division of Custom Climates, which also serves the Okanagan. The Island crew is based in Nanaimo and has its own phone line, 250 713-7355, and the same Red Seal standard and 24/7/365 emergency coverage.
Need help on the Island? Call 250 713-7355 or see our Vancouver Island services.
The Custom Climates Mechanical team, Vancouver Island






Comments